2026 Harley-Davidson® Street Glide® near Bellaire, TX
The 2026 Harley-Davidson® Street Glide® is equipped with the Milwaukee-Eight® 117 engine, delivering a displacement of 117 cubic inches or 1,923 cubic centimeters. This V-twin engine features a bore of 4.075 inches and a stroke of 4.5 inches, paired with a 10.3 to 1 compression ratio. The configuration uses pushrod-operated overhead valves with hydraulic, self-adjusting lifters and four valves per cylinder. This valve design supports consistent operation and reduced maintenance requirements over time.
Engine output is rated at 105 horsepower, equivalent to 78 kilowatts, at 4,600 rpm. Peak torque measures 130 foot-pounds at 3,250 rpm, tested under the J1349 standard. The torque curve supports low- to mid-range acceleration, contributing to stable performance across varied riding conditions. Fuel delivery is managed through Electronic Sequential Port Fuel Injection, which provides controlled fuel metering for improved combustion efficiency.
The lubrication system uses a pressurized, dry-sump configuration that separates oil storage from the crankcase. This setup promotes stable lubrication during sustained operation. The air intake system includes a fiberglass, washable air cleaner that supports filtration and serviceability. Exhaust gases are routed through a 2-1-2 dual exhaust system with tapered mufflers engineered for balanced flow characteristics. Recommended fuel is 91 octane or higher using the R+M method divided by two.
Transmission Architecture and Gear Ratio Optimization
Power is transmitted through a chain-driven primary system with a 34 to 46 ratio. The final drive uses a belt system with a 32 to 68 ratio, providing durable and efficient power transfer. The 2026 Harley-Davidson® Street Glide® features a 6-Speed Cruise Drive® transmission designed for both acceleration and highway cruising stability.
Overall gear ratios are calibrated as follows. First gear is 9.593. Second gear is 6.65. Third gear is 4.938. Fourth gear is 4.0. Fifth gear is 3.407. Sixth gear is 2.875. These ratios support progressive acceleration and reduced engine speed at highway velocities.
The clutch is a mechanically actuated 10-plate wet design with Assist and Slip functionality. The assist mechanism reduces lever effort, while the slip feature helps manage rear-wheel stability during downshifting events. This configuration contributes to smoother transitions between gears and controlled deceleration.
Structural Frame Design and Steering Geometry
The 2026 Harley-Davidson® Street Glide® uses a mild steel tubular frame incorporating a two-piece stamped and welded backbone. Cast and forged junctions reinforce structural stress points. The frame includes twin downtubes and a bolt-on rear section with forged fender supports. All major welded components are assembled using MIG welding processes to maintain consistency.
The swingarm consists of a mild steel, two-piece drawn and welded section with forged junctions. This construction provides rigidity while supporting rear suspension movement. Steering geometry includes a rake angle of 26 degrees and a fork angle of 29.25 degrees. Trail measures 6.7 inches, and wheelbase extends to 64 inches. These measurements influence straight-line tracking and cornering stability.
Static ground clearance measures 5.5 inches. The laden seat height is 26.4 inches based on a 180-pound operator weight. The unladen seat height is 28.1 inches. Overall length is 94.9 inches, overall width is 38.4 inches, and overall height is 53.1 inches. These dimensions define the motorcycle’s physical profile and rider positioning.
Suspension Configuration and Ride Control
The front suspension consists of a 49-millimeter Dual Bending Valve fork. This system is engineered to manage compression and rebound characteristics under varying load conditions. Suspension travel at the front measures 4.6 inches. The rear suspension uses dual outboard emulsion shocks with preload adjustability. Rear suspension travel measures 3 inches.
The preload adjustment allows riders to modify rear suspension response to match load conditions. This setup contributes to chassis balance when carrying passengers or luggage. Lean angle capability measures 32 degrees on both the right and left sides, tested under the SAE J1168 standard.
Wheel Composition and Tire Specifications
The 2026 Harley-Davidson® Street Glide® rides on cast aluminum wheels. The front wheel measures 19 inches in diameter and 3.5 inches in width. The rear wheel measures 18 inches in diameter and 5 inches in width. Tire fitment includes Dunlop® Harley-Davidson® Series bias blackwall tires.
The front tire model is D408F with a 130/60B19 M/C 61H specification. The rear tire model is D407T with a 180/55B18 M/C 80H specification. This tire combination supports load capacity and traction characteristics appropriate for touring applications.
Integrated Braking Hardware and Control Systems
Front braking is managed by dual floating rotors measuring 12.6 inches in diameter and 0.18 inches in thickness. The calipers are 32-millimeter, four-piston fixed units mounted axially. The rear brake uses a single fixed rotor measuring 11.8 inches in diameter and 0.28 inches in thickness, paired with a single axially mounted caliper.
Anti-lock Braking System functionality is standard equipment. Electronic Linked Braking is also included, coordinating brake force distribution between front and rear wheels. The Traction Control System and Drag-torque Slip Control System contribute to controlled acceleration and deceleration. Vehicle Hold Control assists during stationary incline situations. Tire Pressure Monitoring System functionality provides ongoing tire pressure status.
Cornering Rider Safety Enhancements are included. These systems consist of Cornering Enhanced Anti-lock Brake System, Cornering Enhanced Electronic Linked Braking, Cornering Enhanced Traction Control System, and Cornering Drag-Torque Slip Control System. These systems use lean angle input to adjust braking and traction responses while cornering.
Electrical Output and Lighting Configuration
Electrical capacity is supported by a sealed, maintenance-free 12-volt battery rated at 28 amp-hours with 405 cold cranking amps. The charging system is a three-phase 58-amp configuration delivering up to 754 watts at 13 volts. Starting is managed by a 1.6-kilowatt electric starter with solenoid shift engagement.
Lighting components include an LED headlamp, an LED tail and stop lamp, LED front signal lights, and LED rear turn signals. LED technology supports consistent illumination and reduced power draw compared to conventional lighting systems.
An electric power outlet is integrated within the media storage box, delivering 15 watts through a USB-C connection. This allows compatible devices to receive power directly from the motorcycle’s electrical system.
Skyline™ OS Infotainment and Connectivity Systems
The infotainment platform operates on Skyline™ OS and features a 12.3-inch full-color TFT display. Digital gauges are integrated within this display, consolidating vehicle information in a single interface. The system produces 50 watts per channel and supports two 5.25-inch fairing-mounted speakers.
Standard audio features include AM and FM radio functionality. The system supports SD cards, flash drives, and MP3 playback through USB connection. Bluetooth® capability allows hands-free mobile phone integration and media streaming. Apple CarPlay® compatibility is supported through wired or wireless connection.
Embedded navigation functionality is included, with traffic and weather information available through a Wi-Fi hotspot subscription in the United States. The vehicle information screen displays air temperature, oil pressure, and Engine Idle Temperature Management System data. Text-to-speech functionality is available in supported languages. Navigation through Bluetooth® is supported. Rider and passenger intercom compatibility is available with separately sold headsets, and voice-activated operation is supported for Harley-Davidson® headsets.
Capacity, Weight Distribution, and Operational Metrics
Fuel capacity measures 6 gallons, with a 1-gallon reserve indicated by a warning light in fuel-injected models. Oil capacity with filter is 5 quarts. Transmission capacity is 1 quart. Primary chain case capacity is 1.1 quarts. Coolant capacity is 0.82 quarts.
Weight as shipped is 774 pounds. Weight in running order is 811 pounds. Gross Vehicle Weight Rating is 1,360 pounds. Gross Axle Weight Rating is 500 pounds for the front and 927 pounds for the rear. Luggage volume measures 2.42 cubic feet, providing enclosed storage capacity integrated into the touring configuration.
Visit Stubbs Harley-Davidson® near Bellaire, TX
Riders who want to examine the 2026 Harley-Davidson® Street Glide® in detail can schedule a test ride to assess its mechanical and electronic systems directly. At Stubbs Harley-Davidson® near Bellaire, TX, our team provides guided demonstrations of the Milwaukee-Eight® 117 engine output, the 6-Speed Cruise Drive® transmission response, and the integrated Skyline™ OS display interface. A test ride allows you to evaluate the 130 foot-pounds of torque delivery, the calibrated braking systems including Cornering Enhanced ABS, and the suspension travel characteristics under controlled conditions. You can also review the infotainment functionality, Bluetooth® connectivity, and embedded navigation system while stationary or in motion. Contact our dealership to arrange a scheduled ride and examine how the 2026 Harley-Davidson® Street Glide® performs across acceleration, braking, handling, and technology integration metrics.